【Charging Method】

   1. Be sure to use AC 220V/50Hz for charging

    2. Turn off the switch, push out the charging pin and plug it into the power socket.
&Nbsp& Nbsp; 3. When the switch is not turned off, it cannot be charged
&Nbsp& Nbsp; 4. When charging, the charging indicator light is on
&Nbsp& Nbsp; 5. The standard charging time is 8 hours
                                                 【Precautions】

Do not charge in areas where the rated voltage exceeds 240V, otherwise it will break down.

Do not charge continuously for more than 24 hours, and do not charge when the temperature is below 0°C or over 40°C, otherwise it will shorten the battery life.
Do not rinse the body with water or bring it into the bathroom for use, otherwise malfunction may occur
When the body is dirty, you can use a soft cloth to wipe it with neutral detergent. Do not use alcohol or gasoline to wipe the test.
When the product is abnormal during charging or use (such as abnormal smell, temperature and sound), cut off the power supply immediately and stop using it.

 Proper use and maintenance of electric shavers can not only achieve satisfactory shaving results, but also extend the service life of electric shavers. The following aspects should be noted during use

   1. When installing the power supply, pay attention to the polarity of the dry battery or charger to prevent the motor from reversing, thereby damaging the fixed blade and the moving blade.
   2. When shaving, you should push the fixed blade close to the face slowly, and move in the direction of beard growth to let the beard enter the mesh smoothly. If you move along the beard, it will overwhelm the beard and prevent the beard from entering the mesh.
    3. Electric shaver is not suitable for shaving long beard, so it is better to shave once every four days or so. If the beard is long, you should cut it short with push scissors or small scissors first, and then shave it off with electric shaver. If there is no push scissors or small scissors, you should use multiple shaving methods. First, the fixed blade (net cover) touches the skin perpendicular to the beard, and then shave it short, and then press method 2.
&Nbsp& Nbsp; 4. When using an electric shaver with a push shear, the blade of the push shear should be moved at a vertical angle to the face in order to shave the beard clean
&Nbsp& Nbsp; 5. If there is a stop rolling phenomenon during shaving, the power should be turned off and restarted. After the motor rotates normally, continue shaving
   6. The fixed blade of the electric shaver is very thin, and it cannot be forcibly pressurized to deform or damage.
&Nbsp& Nbsp; 7. For dry battery type electric shavers, the battery should be removed after use or when not in use for a long time to avoid moisture and liquid leakage, causing unnecessary corrosion damage. For AC type electric shavers, the power should be cut off and the plug should be unplugged to ensure safety after use. Rechargeable electric shavers should not discharge the power too much. If the battery is insufficient, it should be charged before use. If not in use for a long time, it should also be charged regularly (about three months)
   8. A small amount of lubricating oil should be added to the bearing part regularly to reduce wear. Non-wet electric shavers should not be cleaned with volatile chemicals such as water or alcohol. If the blade of non-stainless steel material is not used for a long time, a thin layer of oil should be smeared on the blade to prevent rust from damaging the blade.
&Nbsp& Nbsp; 9. After each use of the shaver, use a small brush to clean up any dirt such as whiskers. Do not let the dirt pile up, otherwise the motor may get stuck or the transmission may be blocked. At the same time, once the shaving and skin oil solidify on the blade, it will affect the sharpness of the blade